Finishing The Installation - Hinkley CHISEL 60 Manual De Instrucciones

FINISHING THE INSTALLATION

1
1
Tuck connections neatly into ceiling outlet box.
2
Slide the canopy up to mounting bracket and allign the key
2
hole on the canopy to the screw on the mounting bracket,
turn canopy until it locks in place at the narrow section of the
key holes.
Align the circular hole on canopy with the remaining
3
hole on the mounting bracket, secure by tightening the
two set screws.
4 Assemble trim ring by aligning slots in trim ring with canopy
screw heads.Twist to lock into place.
NOTE: Adjust the canopy screws as necessary until the canopy
and trim ring are snug.
Make sure the hook on the hanging bracket properly sits in the groove in the hanger ball before
attaching the canopy to the bracket by turning the housing until it drops into place.
Ceiling Fan
Outlet Box
Hanger
Bracket
Canopy
Trim Ring
WARNING:
Groove
Screws
©2019 Hinkley Lighting, Inc. | hinkley.com |
09