Brita PURITY 450 Steam Instrucciones De Sustitución página 11

Ocultar thumbs Ver también para PURITY 450 Steam:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
Resetting the display unit
To operate the display unit, it must be removed from the connecting fittings.
Slide the display housing up approx. 10 mm and pull off the display unit. The display unit is operated
using a button on the back of the display unit.
If this button is pressed (> 10 seconds), the data set on initial
installation will be accepted again, and the capacity, bypass
setting and input date are all updated.
Note: This automatically sets the monthly limit to 12 months.
Note: If no input is made within 30 seconds, the display will return to standby or operating mode
without accepting amended parameters.
Insert the display unit from the front at a height of approx. 10 mm and slide down. The loops on the
display part must be inserted in the grooves on the measuring head.
5 Removing the filter cartridge
Switch off the appliance's power supply (remove plug).
Close the inlet valve
Put the flush hose into a bucket and release the pressure by opening the flush valve. Catch the
escaping water in a bucket.
Note: If the escaping water exceeds one litre the inlet valve
blocked with scale.
Remove the used filter cartridge
Place the exhausted filter cartridge
(> five mins.).
Close the exhausted filter cartridge
cartridge and return in the original carton to the appropriate BRITA address listed on the back of
the cover.
on the inlet hose
7
Close the flush valve
Put both feet on the kick loops
pressing the lock
and at the same time turning it anti-clockwise as far as
15
it will go.
Place the pressure lid
Put both feet on the kick loops
mantle handles
anti-clockwise as far as it will go.
16
Take your feet off the kick loops
with both hands on the mantle handles
from the pressure vessel
2
in the sink with the connection facing down for drainage
2
with the transport protective cap
2
.
6
7
.
9
and open the pressure vessel lid
12
vertically on the lid handle
3
and turn the pressure vessel lid
12
and press the pressure vessel
12
.
16
1
is not completely closed or
.
20
1
1
.
of the new filter
18
by
3
on the
EN
down
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Purity 600 steamPurity 1200 steam

Tabla de contenido