Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
General information
Loudspeaker maintenance
Important Notice to UK Users –
e
e
as
as
8
1
8
,
Use the supplied cloth to polish dust and
fingermarks from the speakers. Rub the
The power cord on your Mission powered
surface to be cleaned with the inner cloth.
subwoofer is supplied with a plug
Remove tarnish and buff to a high shine with
incorporating a fuse, the value of which is
the dark outer cloth. Do not use spray
indicated on the pin face of the plug. Should
polishes or solvent cleaners as these may
the fuse need to be replaced, an ASTA or BSI
damage the highly polished multi-layer
approved BS1362 fuse must be used of the
lacquer finish. If necessary clean the speaker
same rating. If the plug is cut off it must NOT
grilles carefully with a soft brush.
be re-used. Dispose of any such plug safely.
There is a danger of electric shock if a cut-off
Product service
plug is inserted into a mains socket.
Should a fault occur with your loudspeakers
The wires in the mains lead are coloured in
please pack them correctly, using the
accordance with the following code:
original packaging.
Blue - Neutral: Brown - Live.
As the colours of the wires in the mains lead
Product for service should be returned to the
may not correspond with the markings
appointed dealer from whom you
identifying the terminals in the replacement
purchased the product. If you experience
mains plug, proceed as follows:
difficulties or there is no Mission dealer in
The wire coloured Blue must be connected
your area, contact the Mission distributor for
to the terminal marked with the letter "N" or
your country or the main service centre for
coloured Black. The wire coloured Brown
your region.
must be connected to the terminal marked
with the letter "L" or coloured Red.
BLUE
(NEUTRAL)
OUTER
SLEEVE
8
2
FUSE
BROWN
(LIVE)
CORD GRIP
e
Specifications
80
Recommended Amplifier:
50 - 150 W
Enclosure:
2-way sealed box
Frequency Response ±3dB:
80 Hz - 30 kHz
Sensitivity SPL/M @ 2.83V:
85 dB
Impedance:
8 Ohms compatible
(minimum 4.0 Ohms)
Bass:
110 mm Paramid-S
Mid:
-
Treble:
25 mm Viotex-S
Effective Volume:
3.75 litres
Dimensions (H x W x D):
284 x 160 x 250 mm
11.2 x 6.3 x 9.8 inches
Weight:
6 kg
13.2 lbs
e
c
Specifications
8
Recommended Amplifier:
50 - 150 W
Enclosure:
2-way sealed box
Frequency Response ±3dB:
80 Hz - 30 kHz
Sensitivity SPL/M @ 2.83V:
90 dB
Impedance:
8 Ohms compatible
(minimum 4.6 Ohms)
Bass:
Twin 110 mm Paramid-S
Mid:
-
Treble:
25 mm Viotex-S
Effective Volume:
6.5 litres
Dimensions (H x W x D):
172 x 443 x 250 mm
6.8 x 17.4 x 9.8 inches
Weight:
9.1 kg
20.1 lbs
Warning: When an amplifier is driven beyond its power output capabilities it will produce distorted results which will
quickly damage your speakers by overheating. Make sure that your amplifier is not left unattended when playing, for
example at parties, and turn the volume control down at the first sign of audible distortion.
Mission reserves the right to change specifications without notice. E & OE
e
e
e
81
82
83
50 - 150 W
50 - 150 W
50 - 200 W
2-way sealed box
3-way reflex loaded
2-way ABR loaded
80 Hz - 30 kHz
48 Hz - 30 kHz
44 Hz - 30 kHz
90 dB
90 dB
90 dB
8 Ohms compatible
8 Ohms compatible
8 Ohms compatible
(minimum 4.6 Ohms)
(minimum 4.0 Ohms)
(minimum 4.0 Ohms)
Twin 110 mm Paramid-S
4 x 110 mm Paramid-S
Twin 165 mm Paramid-S
-
110 mm Paramid-S
-
25 mm Viotex-S
25 mm Viotex-S
25 mm Viotex-S
5.75 litres
23 litres
40 litres
403 x 160 x 250 mm
956 x 300 x 334 mm
1108 x 330 x 360 mm
15.9 x 6.3 x 9.8 inches
37.6 x 11.8 x 13.2 inches
43.6 x 13 x 14.2 inches
8.7 kg
19.7 kg
22.1 kg
19.2 lbs
43.4 lbs
48.7 lbs
e
e
as
as
8
1
8
2
Integrated 350 W
Integrated 500 W
ABR loaded
sealed box
36 Hz - 150 Hz
28 Hz - 280 Hz
-
-
250 mm + twin ABR
4 x 210 mm
-
-
-
-
30 litres
46 litres
415 x 365 x 400 mm
430 x 400 x 560 mm
16.3 x 14.4 x 15.7 inches
16.9 x 15.7 x 22 inches
17.3 kg
32 kg
38.1 lbs
70.5 lbs
9
Publicidad
Tabla de contenido
