General Instructions - Seac Sub Diamond Ice Instrucciones

Congratulations for c hoosing the
quality and reliability of a Sea c Diving
Pro produ c t. The equipment you bought
was produ c ed using sele c ted and tested
materials. Our c onstant evolution
results from c ontinuous resear c h and
development. Innovative produ c tion
pro c esses, c onstant testing and a c tual
fun c tionality tests developed at our
resear c h c entre guarantees the
reliability c hara c terizing all Sea c Diving
Pro produ c ts.
Warning!
This booklet is not a diving manual!
Read the w hole instruction
handbook be f ore using this
equipment!
This manual f or use must be
preserved f or the w hole lif e o f the
product!

General Instructions

Be f ore using the regulator or any other
pro d ucts f or u n d er w a t er divin g, yo u
should attend a course held by qualified
instructors and obtain the relevant diving
certificate. The use o f diving equipment by
non certified divers is dangerous and can
lead to serious accidents, or even death, to
the diver and his/her diving mates.
During the assembly and regulation o f the
regulator, every step w as taken to ensure
high reliability o f the product in time.
These steps ho w ever may become ineffec-
tive if the regulator is not used correctly and
if adequate maintenance is not provided.
Seac Diving Pro s.r.l declines any liability
f or any problem arising from non-compli-
ance with the instructions contained in
this handbook.
Introduction
For any other problem, please contact your
dealer or directly Seac Diving Pro. O nly la-
boratories authorized by Seac Diving Pro
may carry out repairs or maintenance.
Seac Diving Pro diving regulators are the
result o f a research carried out in close co-
operation w ith many pro f essional divers.
Their innovative f eatures ensure a reliabi-
lity w hich remains unchanged even a f ter a
long series o f dives. A t the same time, their
easy mechanics and operation allo w an ex-
tremely simple maintenance.
If you are not experienced in the use o f
this equipment, w e strongly advise you to
get f amiliar w ith its operation during test
diving in shallo w w aters and under f avora-
ble conditions; if needed, contact a quali-
fied instructor f or a re fresher course.
This diving regulator has been certified ac-
cording to standard EN 250: 2000 w hich
provides a long series o f f unctional tests
up to a maximum depth o f 50 meters and
at a temperature o f 4 degrees centigrade
(test tolerance range -2°C/ +0°C).
This diving regulator has been designed to be
used w ith normal atmospheric air complying
w ith the specifications o f standard EN 12001.
Do not use this or any other product o f the
Seac Diving Pro line w ith other gases or oxy-
gen enriched air mixtures (usually kno w n as
NITRO X). Failure to f ollo w this recommenda-
tion could cause serious accidents or even
death, due to fire or explosions, or seriously
damage your equipment.
Warning!
Danger!
15