Adjusting The Time; Using The Chronograph - TW Steel CANTEEN STYLE Manual Del Usuario

USE OF THE CROWN
To adjust the time or set the date, unscrew the
crown cap by turning it anti-clockwise. Once
you have unscrewed it, you will see the (small)
crown. After adjusting, screw the crown cap
back by turning it clockwise.

ADJUSTING THE TIME

Pull the crown out to the 2nd position. If you have a
chronograph movement the second hand stops at (0)
position. Turn the crown to set the hour and minute
hands.
ADJUSTING THE DATE
Pull the crown out to the 1st position.
Turn the crown counter-clockwise to set the date. After
the date has been set, push the crown back to its
normal position.

USING THE CHRONOGRAPH

The chronograph is able to measure and display the time in 1/1
second united up to a maximum of 1 hour. The chronograph can be
started and stopped each time button A is pressed. Pressing button
B resets the chronograph. All hands return to their (0) position. If the
chronograph second hand does not return to the (0) second position
after the chronograph has been reset or after replacing the battery,
you should do the following: Pull the crown out to the 2nd position.
Press button A to set the chronograph second hand to the (0)
position. The chronograph second hand can be advanced rapidly by
holding button A. Once the chronograph second hand has returned
Hour hand
Chronograph
minute hand
Chronograph
second hand
Second hand
Date
to the (0) position, return the crown to its normal position and screw the
crowncap clockwise back to the case.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO LONGER
WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
(0) position
Button A
60
Minute hand
24-hour hand
60 24
60
30 12
Crown cap /
AUTOMATIC
normal crown
30
position
120
Button B