Adjusting The Time; Using The Chronograph - TW Steel PILOT Manual Del Usario

USE OF THE CROWN
To adjust the time or set the date, pull the crown out
to the 1st or 2nd position. After adjusting, push the
crown back to its normal position.

ADJUSTING THE TIME

Pull the crown out to the 2nd click position so that the
second hand stops at (0) position.
Turn the crown to set the hour and minute hands. After
adjusting the time push the
crown back to the normal position.
ADJUSTING THE DATE
Pull the crown out to the 1st position.
Turn the crown anti-clockwise to set the date.
After the date has been set, push the crown back to the
normal position.

USING THE CHRONOGRAPH

The chronograph is able to measure and display the time in 1/1
second united up to an maximum of 1 hour. The chronograph can be
started and stopped
each time button A is pressed. Pressing button B resets the
chronograph. All hands return to their (0) position.
If the chronograph second hand does not return to the (0) position
after the chronograph has been reset or after replacing the battery,
you should do the following: Pull the crown out to the 2nd position.
Press button A to set the chronograph second hand to the (0)
position.
Hour hand
Chronograph
minute hand
Chronograph
second hand
Second hand
Date
The chronograph hands can be advanced rapidly by continuously
pressing button A. Once the chronograph second hand has returned
to the (0) position, push the crown back to the normal position.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
(0) position
Button A
Minute hand
Chronograph 24-
hour hand
Crown / normal
crown position
Button B