Switching On And Off; Adjusting The Rotational Speed; Changing The Direction Of Rotation; Maintenance And Cleaning - Parkside PBH 800 A1 Traducción Del Manual De Instrucciones Original

Switching on and off

Switching the appliance on:
♦ Press the ON/OFF switch
Switching the device off:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation:
♦ Press the ON/OFF switch
again .

Adjusting the rotational speed

The ON/OFF switch
control . Pressing the ON/OFF switch
yields a low speed . Increasing pressure increases
the speed .

Changing the direction of rotation

♦ Change the direction of rotation by pressing
the rotation direction switch
or right .

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
■ Never permit liquids to penetrate inside the
appliance .
■ Use a soft, dry cloth to clean the housing .
■ Clean the tool holder
CAUTION! PRELOADING!
♦ To do this, pull the locking collar
and pull the dust protector cap
of a screwdriver off the tool holder
PBH 800 A1
.
.
. Lock it in the
and release it
has a variable speed
lightly
towards the left
regularly:
backwards
with the help
.
WARNING!
► If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards .
NOTE
► Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service hotline .

Disposal

The packaging is made from environmen-
tally friendly material and can be dis-
posed of at your local recycling plant .
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner .
Your local community or municipal authorities can
provide information on how to dispose of the
appliance .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product .
GB │ MT │ 37 ■