3.Turn the engine switch to the ON position.
(FT, GT, ITT types)
4.Pull the starter grip lightly until you feel resistance, then pull the
starter grip briskly toward in the direction of the arrow as shown
below.
CAUTION:
• The starter grip can be drawn back very quickly before you release it.
This may pull your hand forcefully toward the engine and cause an
injury.
• Do not allow the starter grip to snap back. Return it slowly by hand.
• Do not let the starter rope rub against the generator body, or the rope
will wear out prematurely.
32
(UT, RT types)
ON
OFF
ENGINE SWITCH
Direction to pull
STARTER GRIP