Ghibli & Wirbel S-TEAM 10 VH Manual De Instrucciones página 12

INTRODUCTION
This manual is an integral part of the
appliance and it contains all the
necessary
operation and maintenance. The user
must read it carefully before starting
the appliance.
ORIGINAL INSTRUCTION
The text was scrupulously revised, however, any
eventual printing mistake should be indicated to the
manufacturer. Moreover, in order to improve the product
we reserve the right to modify and update this publication
without notice. Any reproduction of this manual, even
partial, is forbidden without the authorization of the
manufacturer.
INTENDED USE
Professional steam generator:
This appliance is to be used in the inside. The functions
provided for this appliance are exclusively the cleaning
of floor and washable surfaces compatible with steam,
textiles included; (not to be used on electrified parts).Any
other use other than that, it is to be considered
unauthorized and dangerous.
IDENTIFICATION AND TECHNICAL DATA
On the label attached on the back of the machine, you
can find the technical specification shown in the chart
below:
Model:
Electric power supply
Max power
Steam pressure
Steam production
Boiler capacity
Heating time
Acceptable pressure
Steam max temperature
Boiler max power
Boiler material
Weight
Dimensions LxPxH
Tolerated water conductivity
Water tank
Detergent tank
Vacuum bucket
Vacuum motor By-pass 2 st.
Appliance of class
Sound pressure Kpa
Doubt Kpa
SAFETY DEVICES OF THE PRODUCT:
Bipolar bulb thermostat and manual reset, with capillary
inserted in the tube between the resistances, intervenes
in the event of an anomaly or excessive temperature.
Safety valve, it allows the discharge of the steam in
excess in case of anomalous condition of the machine
under pressure. If it starts working, turn the machine off
and take it to a maintenance center for a checkup.
Low voltage in the handle (safety voltage used for
connection to the inside of the hose).
information for its
S-TEAM 10 VH
220V - 230V 50Hz
3.6kW
1000kPa (10 bar)
80÷95 g/min.
3.5l
6 min.
1200kPa (12bar)
185°C
3.3kW
inox Aisi 304
38,2 kg
830 x 480 x 1170 mm
80÷1500uS/cm (4÷75 °f)
5l
5l
10l
max. 175 m³/h
(1200-1400W)
I
76 dB(A)
2 db(A)
SAFEGUARDS RULES
- The Electric power connection must be made by a
qualified electrician and must conform to IEC 60364-1. It
is recommended that the electric supply to this machine
should include a residual current device that interrupts
the power supply if the leakage current to ground
exceeds 30 mA for 30 seconds or a device that checks
the grounding circuit.
- WARNING Children or unqualified persons should not
use the machines.
- The device can be use by persons with reduced
physical, sensory or mental capabilities, or lack of
experience or knowledge as long as they are under
surveillance or after having received instructions
regarding the safe use of the appliance and after the
comprehension of its dangers.
-Children must not play with the appliance.
- The appliance must be disconnected from the plug after
use and before the user performs maintenance on the
unit.
- The cleaning and maintenance meant to be performed
by the user should not be made by children without
supervision.
- The liquid or steam must not be directed towards the
devices which contain electrical components, such as
the interior of ovens.
- Do not use in swimming pools when they are full of
water.
- Do not leave the device unattended when it is
connected to the power.
- Do not use the device if it has been dropped, if there
are visible signs of damage or if there are losses.
- Maintain the machine out of reach of children when it is
used or it is cooling down.
12
USED SYMBOLS
GENERAL DANGER: when used,
this symbol indicates the need to
carefully pay attention to the
functions or notes described
MAINTENANCE: operations and
maintenance details
STEAM : attention hot steam jets
HOT SURFACES: attention burns
DECOMMISIONING: rules to be
followed at the end of the product
life
DO NOT DIRECT THE JET
towards persons, animals, electrical
equipment under pressure or the
machine itself