Care And Maintenance; Troubleshooting; Corrective Action; Warranty - Kobalt KBS 124B-03 Manual De Instrucciones

CARE AND MAINTENANCE

All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack. For safe and
proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your belt sander; never use detergent or alcohol.

TROUBLESHOOTING

WARNING
• Make sure that the sander is OFF and remove the battery before performing troubleshooting
procedures.
PROBLEM
Tool does not work.
Belt cannot be
installed.
Motor overheating.

WARRANTY

For 5 years from the date of purchase, the tool is warranted for the original purchaser to be
free from defects in material and workmanship. This guarantee does not cover damage due
to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
Low battery capacity.
Wrong size.
Cooling vents are
obstructed.

CORRECTIVE ACTION

Charge the battery pack.
Use a belt of the correct size.
Clean and clear vents. Do not cover vents
with hand during operation.
13
Printed in China