CMS XRD S Manual De Instrucciones página 8

English
Restraint system
There are three types of restraints:
8
DD retention system
To secure the helmet, follow the figure: passing
the tape between the two rings (1), pull the tip
and pass between the two rings in reverse (2)
push the safety button on your site (3).
To remove, follow instructions in reverse order
of tightening.
Fast release buckle
The buckle system requires an adjustment be-
fore being fastened.
To secure the helmet, follow the instructions
of the figure: Place the socket on the retention
mechanism until it clicks (1).
To open thesystem, press the red button (2).
Micrometric adjustment buckle
The system needs a micrometric regulation
buckle adjustment before being tight.
To secure the helmet, follow the instructions
of the figure: Insert tab toothed belt metal and
pushes it to feel the belt press against the jaw,
putting the piece in as necessary (1).
To open the system, lift the red lever, assisting
with the small fabric ribbon and pull the buckle
in the opposite direction to grip (2).