Message; Phone Code; Pin Code And Puk Code; Text Input - JETFON X-500 Manual De Instrucciones

number from the dialled calls list, then press [SEND] key to make the call.
Notes:
- Add the international prefix, country code and area code (without the leading "0") before
the number when making an international call.

9.3.- MESSAGE:

Select messaging in menu.
● Select Write message to write message. Press "Options" select "Send" or "Save" as draft.
● Select Inbox to view messages received.
● Select Outbox to view the failure messages.
● Select Drafts to view the draft messages.
● Select Sent messages to view the successfully sent messages.
● Select SMS Templates to view the template messages.
● Select Message settings to make some necessary short message settings.

9.4.- PHONE CODE:

Phone code could prevent your phone from unauthorized use. The default phone code is 1122.
Change it to your own as soon as possible.
If you change the default phone code to a new one, remember it or place it at secure place.

9.5.- PIN CODE AND PUK CODE:

● PIN code: PIN code could prevent your SIM card from illegal use. When PIN code is enabled,
you should enter the PIN code when powering ON the phone again. Change the default PIN code to
your own as soon as possible.
● PUK code: The SIM card will be locked if you enter a wrong PIN code consecutively for three
times. To unlock it, you need PUK code of the SIM card.
Notes:
PIN code and PUK code may be offered together with the SIM card. If not, contact your
service provider.

9.6.- TEXT INPUT:

Operation
Burmese character
Input digits
Input letters
Pref. input method
Input symbol
Input space
Erase character
Move the cursor
Change input mode
Mya, press the needed key till the character appears.
123, press the Number keys to input the digits you want directly.
Abd, abd, ABC, press corresponding letter key till the letter
appears.
Setting > Phone Settings > Pref. Input method.
Press [#] key, and then select corresponding symbol by using
Scrolling keys.
Apart from Numbers input mode, press [0] key to add space.
Press [NAMES/CLR/BACK] key, press and hold this key until the
character be erased.
Press Scrolling keys.
Menu > Messaging > Write Message Options > Input Method.
English - 9 -
Method