Percent (%) Weighing Mode - Baxtran BAP Serie Manual De Instrucciones

Press the key to select the sample size from 10, 20, 50, 100, 200, 500 y 1000.
SAMPLING
Put on some samples with a sample size the same as the current displaying
one. Then press the
ral seconds later, the display shows as below:
Take off the samples on the pan. The sampling operation is finished. Then the
balance can be used for counting.
Press key to return to normal weighing mode (Pressing
ter it returns to weighing mode will bring back to counting mode and the unit
weight data is still stored for use).
Note:
1. If a container needs to be used, press TARE key to subtract its weight before entering into the
counting mode.
2. If the unit weight is too small (less than 0.2 of a scale division), the display will show: --or-- PCS.

4.4 PERCENT (%) WEIGHING MODE

In normal weighing mode, press the
Press or
SAMPLING
Put the item to be considered 100% on the pan and press the
the displayed value starts flickering. Several seconds later, it stops flickering.
Take off all the weight on the pan and the display shows as below:
key and the displayed value starts flickering. Seve-
below:
key twice to enter into percent weighing mode.
key to change to "100.00%" .
USER MANUAL BAP
key af-
key. Then
EN EN
9