TYPICAL INSTALLATION
Discharge pipe no smaller than pump outlet.
2" or 3" Vent Pipe
Sump Cover
Pump
6
Separate protected and grounded
service outlet minimum 4' from floor.
Pump Power Cord
Pump Power Grommet
Gas-tight Basin, 18" dia. x 24" deep min.
3/16" dia. Bleed Hole in Discharge Pipe
SFS Models
• 7" - 10" on level
SFS Models
• 2" - 5" o level
Place pump on hard level surface.
Never place directly on clay, earth or gravel surface.
Gate Valve
Check Valve
Union