Youin You-Go. SC3000 Manual De Instrucciones página 17

8.3. Adjusting a brake disc
If a brake is very tight:using M5 hex wrench and scroll counterclockwise screws of
brake disc tensioner pulley,slightly shorten a length of a tail brake cable,then tighten a
tensioner pulley.If you think that brake is very free,loosen a tension pulley,pull a brake
cable to slightly increase a length of its tail.Tighten a tension pulley.
8.4. Adjusting a handle bars
Staggering of steering rack: using a M5 hex wrench, tighten two screws near the folding
mechanism.
8.5. Using a connecting pipe to pump wheels
If a rear wheel of Electric Scooter deflated,connect a connecting pipe to a wheel nipple
to pump it .First,remove the a cap of pin,then tighten a fitting,and then you start to pump
a wheel.
ENGLISH 17