Functions - Duux Bora Manual De Usuario

Storage
Before storing the device, use the cleaning mode
to completely dry the humidifier from the inside to
prevent the growth of contaminants like mold and
bacteria. See chapter 4 for instructions. Once clean
and dry, put the device and all its components into
the original box and store them in a dry place.
Spare parts
Spare parts and accessories can be requested at
the point of purchase or local distributor.
12

4. Functions

NIGHT
Power
Press the key to switch on the device. The
corresponding indicator will light up on the display.
The display screen will show the actual humidity.
When device is in standby mode, the ambient
humidity will be shown on the display.
Night mode
Press and hold the key for 3 second to activate
night mode. The indicator will start blinking and
light up brightly before the whole display will be
dimmed after 10 seconds. Press any button to
reactivate the display. To deactivate night mode,
press and hold the again for 3 seconds or press
the 'Operation Mode' button.
Cleaning mode
Note: only use this mode before storage or
long period without operation.
Press this key to start the dry cleaning
procedure. This prevents the growth of
contaminants like mold and bacteria inside the
device. Once activated, the display will show
"CL" and the indicator will illuminate. The whole
procedure takes approximately 1 hour of which
30 minutes in high fan speed and 20 minutes in
low fan speed. Press this key again to cancel the
procedure and resume operation.
13