Tabla de contenido
Publicidad
18. Declaración de conformidad UE / CE
Certus Multifunctional Safety Relays CM22D0A, CM40D0A, CM30D1A, CL20D2A
EN 62061:2005+A1:2013+A2:2015
EN ISO 13849-1:2015
EN 61508:2010
EC Type Examination:
EN 61326-3-1:2008
EN 61000-6-4+A1:2011
EN 50581:2012
Notes:
This Manufacturer's Declaration of Conformity is only valid under the condition that:
- the above-mentioned products are protected against accidental touch and are installed as prescribed in the installation documentation.
- we are correctly informed about RoHS compliance of all components and raw material by the relevant suppliers.
- we undertake to transmit, in response to a reasoned request by the national authorities relevant information about the safety modules. The
safety modules must not be put into service until the final machinery incorporating them has been declared to conformity with the provisions
of Machinery Directive, where appropriate.
30
30
Rev.01 | CERTUS Multifunction Safety Module | © 2017 | CARLO GAVAZZI Automation
EU/EC Declaration of Conformity
(DRAFT version, to be used for TUV Nord CERT GmbH verification)
CARLO GAVAZZI AUTOMATION SPA,
Via Milano 13, 20020 - LAINATE – ITALY. Tel. +39 02 93176 1 - Fax +39 02 93176 304
are in conformity with the applicable essential requirements of the following Directives:
Machinery Directive 2006/42/EC
Safety of machinery - Functional safety of safety-related electrical, electronic and
programmable electronic control systems
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for
design
Functional safety of electrical/electronic/programmable electronic safety-related systems
TÜV Nord CERT GmbH (notified body 0044), cert. n. 44 205 15 176906
EMC Directive 2014/30/EU
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-
1: Immunity requirements for safety-related systems and for equipment intended to perform
safety-related functions (functional safety)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for
industrial environments
RoHS Directive 2011/65/EU
Technical documentation for the assessment of electrical and electronic products with respect
to the restriction of hazardous substances
Person that is authorised to compile the technical file is:
Mr. Adriano Salvadore, Via Milano 13, 20020 - LAINATE – ITALY Tel.: +39 02 93176.1
CE marking: design and manufacturing follow the provisions of the European Directives above mentioned
Place/date
Signature
Name
We
declare that the products
Lainate, May 12
, 2017
st
____________________
Vittorio Rossi
(Managing Director)
Issue No.:009LA04052017_DRAFT
cert. N.
QA130463
cert. N.
EA130475
Publicidad
Tabla de contenido
