Publicidad
Idiomas disponibles
Idiomas disponibles
P E R F O R M A N C E
GM
PARTS
Exhaust Tip Installation onto GMPP Cat-back Exhaust System
Note: With a used vehicle, we suggest a penetrating spray lubricant
to be applied liberally to all exhaust fasteners and allowing a
significant period of time for the chemical to lubricate the threads
before attempting to disassemble.
1. Place a clamp over the expanded end of tip as shown
in figure 1.
FIGURE 1
2.
Install the tip as shown in figure 2.
FIGURE 2
3. Check your exhaust system for proper clearance under the
vehicle and also for tip alignment.
4. Tighten the clamp securing the tip to 32-35 ft. lbs.
Chevrolet/GMC Colorado/Canyon Exhaust Tips
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GMSPO SPECIFICATIONS.
5. Before starting your vehicle, make sure to check all wires,
hoses, brake lines, body parts and tires for safe clearance from
the exhaust system.
6. Congratulations. As shown in figure 3, you have completed
the installation of your GM Performance Parts Exhaust Tip.
FIGURE 3
19156226
IR 10OC05
PART NO.
DATE
REVISION
GENERAL MOTORS
SERVICE PARTS OPERATIONS
6200 Grand Pointe Drive, Grand Blanc, MI 48439
2
6
PAGE
OF
AUTH
Publicidad
