DUCASSE INDUSTRIAL TWIN OP Instructivo De Montaje página 22

step 6
- Keep mounted doors in its closed position to fix the stoppers. To do this, you need to
move them until they fit with the carriers and then, fix them in that position.
- Fix DN 80 stoppers to the desired position using the screwdriver, as indicated in
Figure D .
PF
- Then, to fix the remaining stoppers it is necessary to bring the doors to a open position,
move the stoppers until fitting them with the carriers and fix them in that position.
PF
22
T
T
* To make sure the pieces are left in the right
position, it is necessary that the pulley is free
towards the center of the rail.
- To achieve an optimal termination
it is necessary to consider the
minimum measures of overlapping (T).
* To make sure the pieces are left in the right
position, it is necessary to fit the stoppers
on the carrier.
T
Stoppers Set-up
T
PF
PF
T = 50 min