Auto Power Off Function; Reset Function - Audio-Technica ATH-CKS550XBT Manual De Usuario

Using the product
Talking on the phone
• If your Bluetooth device supports telephone features, you can use the product to talk on the phone.
• When your Bluetooth device receives a phone call, the product sounds a ring tone.
• If a call is received while you are listening to music, music playback is paused. When you finish the call, music
playback resumes.*
1
Operation
When
Press the power supply/control button.
Receiving
Press and hold the power supply/control
a call
button (for about 2 seconds).
Press the power supply/control button.
Talking on Press and hold the power supply/control
a call button (for about 2 seconds).
Press a volume button (+ or -).
*1 Depending on your Bluetooth device, music playback may not resume.
*2 When you hear a confirmation tone, release the power supply/control button.
• The phone call controls explained above may not be available on some smartphones.

Auto power off function

The product automatically turns off after 5 minutes of not being connected to a device.

Reset function

If the product does not work or other malfunctions occur, refer to
"Charging the battery" (p. 5) and connect the USB charging
cable that is carrying power, and then reset the product.
Disconnecting and then reconnecting the USB charging cable
should resolve any problem you are experiencing. If the problem
persists, please contact your local Audio-Technica dealer.
Resetting the product will not change any of your settings (pairing
information, volume setting, etc.).*
* The SBC priority connection (p. 13) will be disconnected.
Function
Answers the call.
Rejects the call.
Ends the call.
Each time you press and hold the button (about
2 seconds), you switch the call to your mobile phone or
*2
to the product.*
Adjusts the volume (+ or -) of the call.
9
2