Tabla de contenido
Publicidad
Indicator lamp display
The indicator lamp of the product indicates the product's status as explained below.
Status
Searching for device
Pairing
Searching for device (when using
an SBC priority connection)
Waiting to be connected
Connecting
Connection
Connecting (when using an SBC
priority connection)
Battery level
Battery level low
Charging
Charge
Fully-charged
Cleaning
Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint
thinners, or other solvents for cleaning purposes.
• To clean, wipe with a dry cloth.
• Immediately wipe off any moisture such as sweat from the battery jack or operating
areas such as the buttons. Failure to do so may result in a malfunction due to
corrosion.
• Natural oils from the skin are particularly likely to build up on the eartip attachment
parts (see figure at right). If these areas are not cleaned, the eartips can become
detached. Clean them regularly. Do not touch the areas where sound is produced as
they are delicate. Doing so may result in malfunction.
• Wipe away any perspiration or dirt from the cable with a dry cloth immediately after
use. Failure to clean the cable may cause it to deteriorate and harden over time,
resulting in malfunction.
• Wipe the cable's USB plug with a dry cloth if dirty.
• Clean the eartips by removing them from the headphones and manually cleaning them
with a diluted mild detergent. After cleaning, dry before using again.
• If the product will not be used for an extended period of time, store it in a well-ventilated place free from high
temperatures and humidity.
Indicator lamp display pattern
Blue or purple in the pairing or connection status turns red.
10
Red
Blue
Purple
Flashing
Lit
Lit
Eartip attachment
part
Sound
reproduction
part
Publicidad
Tabla de contenido
