Declaration Of Conformity - DeWalt DW917K2 Manual De Instrucciones

The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this manual.
Denotes risk of electric shock.
Fire hazard!

Declaration of conformity

DW917K2/DW921K2/DW922K2
D WALT declares that these Power Tools have been
E
designed in compliance with: 89/392/EEC,
89/336/EEC, 73/23/EEC, EN 60335, EN 55104,
EN 61000 & EN 55014.
Level of sound pressure according to 86/188/EEC &
89/392/EEC, measured according to DIN 45635
Part 1 and Part 2 (EN 50144):
L (sound pressure) dB(A)*
pA
L (acoustic power) dB(A)
WA
* at the operator's ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 50144:
European Director
Product Planning & Development
Brian Cooke
D WALT, County Durham, U.K.
E
17
DW917K2 DW921K2 DW922K2
<70 <70 <70
<85 <85 <85
DW917K2 DW921K2 DW922K2
2 2
< 2.5 m/s < 2.5 m/s < 2.5 m/s
Safety instructions
When using Power Tools, always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and
personal injury. Read the following safety
instructions before attempting to operate this
product.
Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause
accidents.
2 Consider work area environment
Do not expose Power Tools to humidity. Keep
work area well lit. Do not use Power Tools in the
presence of inflammable liquids or gases.
3 Guard against electric shock
Prevent body contact with earthed surfaces (e.g.
pipes, radiators, cookers and refrigerators).
For use under extreme conditions (e.g. high
humidity, when metal swarf is being produced,
etc.) electric safety can be improved by inserting
an isolating transformer or a (FI) earth-leakage
circuit-breaker.
4 Keep children away
Do not let children come into contact with the
tool or charger. Keep all people away from the
work area.
5 Store idle tools
When not in use, Power Tools must be stored in
a dry place and locked up securely, out of reach
of children.
6 Dress properly
Do not wear loose clothing or jewellery. They can
be caught in moving parts. Preferably wear
rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
2
to keep long hair out of the way.
7 Wear safety goggles
Also use a face or dust mask in case the
operations produce dust or flying particles.
8 Beware of maximum sound pressure
Take appropriate measures for the protection of
hearing if the sound pressure of 85 dB(A) is
exceeded.
9 Secure workpiece
Use clamps or a vice to hold the workpiece. It is
safer and it frees both hands to operate the tool.
E N G L I S H
en - 2