Mediclinics GAJ002AC Instalación página 7

Debugging step for soap dispenser
1、Fill the bottle full of liquid soap for the first time；
2、Press and hold the dispense button on the control box, release till
the soap is dispensed.
3、Start the system by passing your hand in the sensor range, soap
will dispense automatically.
Note: It has four soap dispense volume adjustment:
1. Low volume
2. Normal volume
3. Medium volume
4. High volume
The firs gear The second gear
The third gear The fourth gear
Viscosity of liquid soap:100-3500cp(mpA.s)
Recommended Usage
Domestic Heavy Commercial
Light Commercial
Health Care
WALL
Aerator
Transformer
Pipe buckle
Pump
Battery case
Battery
wall
bracket
30mm
Floor
Part name
Soap nozzle
Water sensing
Soap sensing
Faucet body
Basin
Nut
M26*1.5mm
Rotary union
OUT
Control box
IN
Inlet
Bottle
wall
bracket
94mm
Bottle