Alteration Of System Monitoring; Alteration Of Operating Modes - Vogel KFG Serie Instrucciones Para El Manejo

6.3 Alteration of system monitoring

Carry out steps 1 to 2!
Step Key
3
Press until:
4
Press SET shortly
5
Press
optionally until:
Confirm new settings
6
Press SET shortly
New settings will be written into the memory
7
and the display will go off.
Press SET
longer than 2s

6.4 Alteration of operating modes

Carry out steps 1 to 2!
Display
Start of monitoring
settings is displayed.
System monitoring is
switched off
(setting by factory)
Monitoring by cycle
switch, i.e. LED „CS"
is flashing.
or Monitoring by
pressure switch
Not allowed for
progressively-acting
systems !
Step Key
3
4
Press SET
shortly to confirm
counter operation
5
Confirm new settings
6
Press SET shortly
New settings will be written into the memory
7
and the display will go off.
Press SET
longer than 2s
Page 29
Contents Chapter
6
Operating Instructions KFG, KFGS
Display
Change from pause time
to counter operation (only
possible with external
electric pulse generator
Values in pulses
Display of pump
operating time in timer
operation
Change from pump
operating time to
counter operation
(special purpose
function)