Battery And Fuse Replacement - Steren MUL-283 Manual De Instrucciones

MEASURING AUDIBLE CONTINUITY
1.- Connect the red testing point in the jack signaled "Input"
and the black testing point in the jack signaled "COM".
2.- Set the dial to the ")))" range.
3.- Connect the testing points on the circuit to be measured. If
the resistance is less than 50Ohm the multimeter will sound.

BATTERY AND FUSE REPLACEMENT

1.- In the multimeter´s back, unscrew the battery compartment
cover, then leverage the support to removes the cover.
ENGLISH-15