aquatechnik BBS 32 Instrucciones De Utilizacion página 17

REPL CING THE EL STOMERIC D PTER
The elastomeric adapter (H) must be replaced only when it has evident signs of
tearing (cuts or breaks).To replace it, just follow the specified instructions and use the
suitable splitting wrench (item 50830)
1) Completely introduce the elastomeric adapter
into the tips of the splitting wrench following its
coning (picture 4).
2) Open the splitting wrench slowly and press hard
and repeatedly pausing a few seconds at each
opening.
Repeat the operation several times rotating the
elastomeric adapter (picture 5) in order to obtain
a uniform expansion.
Set the splitting wrench at rest. Take the
3)
expanded elastomeric adapter and introduce it -
rapidly and following its coning- into the
mechanical expander by pushing it flush with the
same expander. In order to make this operation
easier, use a plastic-head hammer.
NB: Make sure that the elastomeric adapter and
the mechanical expander have the same
diameter (see
correspondence in the table).
the diameter-colour
BBS 32
(patented)
Picture 4
Picture 5
Picture 6
ENGLISH 17