6
Spare parts
Bulb HID 2 inch
Bulb HID 4 inch
Ballast 30 watt (for HID 2)
Ballast 40 watt (for HID 4)
Stone guard
Brake hose guide
Rubber mask piece
NOTE:
To replace the lamps or ballasts, the headlight mask must be detached and the rear cover of the headlight mask X2 must be
removed.
The brake hose and speedometer cable must be routed within the lamp
mask (see Figure B). The lines should not be clamped or kinked in any
way.
NOTE:
The included stone guard may be mounted if needed.
In wet or humid weather, the stone guard may fog over and condensation
may form. To avoid this, pierce the silicone plug (2) with a pointed object.
B
If the X2 headlight is mounted, no other power consumers may be
mounted on the motorcycle.
NOTE:
If necessary, you can also ride with the original headlight mask. Detach
the X2 headlight mask and plug in and mount the original headlight mask.
NOTE:
2
The headlight is now connected directly to the battery. To avoid a voltage
drop in the battery when the engine is switched off, the lights must be
switched off manually at the light switch.
78014903000
78014903200
78014996000
78014997000
78014907000
78014908000
50211086000