Descargar Imprimir esta página

MikroTik LtAP LR8 LTE Serie Guía Rápida página 2

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
This Device accepts input of a 24V DC power adapter, which is provided in the original packaging of this
device.
First steps:
 Open the bottom lid;
 Insert the SIM card into the SIM 2 slot (middle);
 Connect the device to the power source;
 Connect with your computer to the MikroTik wireless network;
Open https://192.168.88.1 in your web browser to start the configuration;
The user name: admin and there is no password set, by default;
Once connected, in the QuickSet LTE AP menu, enter your PIN code https://mt.lv/configuration;
Upgrade the RouterOS software to the latest version https://mt.lv/upgrade;
Connect again and in the QuickSet LTE AP menu set your wireless network password;
 Choose your country on the left side of the screen, to apply country regulation settings;
 Secure your device and set a strong password.
Find your LR Gateway ID on the label within the product and register it in your Network Server.
Safety Information:
 Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry,
and be familiar with standard practices for preventing accidents. The installer should be familiar with
network structures, terms, and concepts.
 Use only the power supply and accessories approved by the manufacturer, and which can be found in
the original packaging of this product.
 This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
 This product can be installed outdoors. Please read the mounting instructions carefully before
beginning installation. Failure to use the correct hardware and configuration or to follow the correct
procedures could result in a hazardous situation to people and damage to the system.
 We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
 In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power adapter from the power outlet.
 This is a Class A product. In a domestic environment, this product might cause radio interference in
which case the user might be required to take adequate measures.

Publicidad

loading