Maintenance - Kapro PROLASER 875 LAYOUT SET Manual Del Usuario

CARE AND MAINTENANCE

Maintenance

• Store in a clean and dry place
• Lock the unit before transporting it.
• If the laser level is wet, dry it with a cloth before storing it. Do
not seal the laser in the carrying case until completely dry.
• Do not attempt to dry the laser level with fire or with an electric
dryer.
• Do not drop the laser level, avoid rough treatment, and avoid
constant vibration.
• Periodically check the calibration of the laser level.
• Clean with a soft cloth, slightly dampened with a soap and water
solution. Do not use harsh chemicals, cleaning solvents or strong
detergents.
• Keep the laser aperture clean by wiping it gently with a soft
lint -free cloth.
• Remove batteries from the laser level during lengthy periods of
non-use, and store in carrying case.
• Ensure that the laser level is turned off before removing batteries.
Repairs
• See the warranty section at the end of this manual.
• Do not take the Prolaser 875 apart or permit any unqualified
person to take the laser level apart. Unauthorized servicing may
cause bodily injury, irreparably damaging the laser level, and
invalidate the warranty.
Field Calibration Test
The laser level leaves the factory fully calibrated. Kapro recommends
that the level is checked regularly, or after the unit has been dropped
or mishandled.
11