Εnglish
Assembly
Check the power supply for any damage! Only connect a
power supply to the TM-E terminal module if you are
certain that the power supply is undamaged.
In Zone 1 and Zone 2, the power supply submodules may
be inserted and removed during operation. The enclosure
(Ex e / IP 54) in which the ET 200iSP is found may only be
opened briefly for this purpose (see the ET200iSP
manual).
Commissioning
The relevant national regulations must be observed when
commissioning the system.
When checking the functionality of the equipment, observe
the EN 60 079-17 guidelines. This standard includes the
regulations found in the international standard
IEC 60 079-17.
A5E00688978-05
Εnglish