Cleaning And Maintenance - Svan SVCA100SP Manual De Instrucciones

OPERATION OF THE HEATER
The appliance is switched on by means of the pull switch. The slight
vibration noticeable when the appliance is switched on will stop after
a few seconds.
By pulling of the pull switch you can set the power steps:
Position 0 Off
Position 1 650 W (normal power)
Position 2 1350 W (intermediate power)
Position 3 2000 W (full power)

CLEANING AND MAINTENANCE

Before cleaning the appliance, switch it off, remove the plug from the
•
current socket and leave it until getting cool.
Protect the radiant part from dust to preserve its reflectivity.
•
To clean the base and the radiant part, use a slightly damp, soft cloth;
•
do not use scouring pads or abrasive products.
Should you decide not to use the appliance any more, we
•
recommend making it inoperative by cutting the power cord (after
making sure you have disconnected the plug from the socket) and
make dangerous parts harmless if children are allowed to play with
them, such as the heating elements.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE), requires that old household
electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be
collected separately in order to optimize the recovery and recycling of
the materials they contain, and reduce the impact on human health
and the environment. The crossed out ‚wheeled bin‛ symbol on the
product reminds you of your obligation, that when you dispose of the
appliance, it must be separately