Honeywell TP30AWKN Manual Del Usario página 18

USE & OPERATION (CONTINUED)
DRAINING THE WATER (CONTINUED)
3.2 If there are leaks, the Auto Drain Pump Tube and Auto Drain Pump Cap may have loosened and
may not be connected properly. Disconnect, replace and tighten again.
3.3 To activate the Pump function, press the
be illuminated.
3.5 Place the other end of the tube into the sink or drain. The water can be pumped up
vertically or horizontally.
NOTE: DO NOT use an alternative drain tube that is longer than the one provided with
the unit.
IMPORTANT: The Auto Drain Pump button needs to be pressed to re-activate the auto drain
pump function when there is a power failure. See section on "Auto Restart" Function of this user
manual.
*Auto Drain Pump Tube is included in Dehumidifier models with Auto Drain Pump feature only.
indicator. Once on, the
EN 17
indicator light will
to 16.4 ft (5 m)