Gree GMV-H224WL/A-X El Manual Del Propietario página 32

DC Inverter Multi VRF System
7
8
9
10
11
12
Communication
13
parameters
14 Drainage system
15 Others
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Compressor
working current
Compressor's
IPM temp
IDU ambient
temp
Indoor heat
exchanger's inlet
temp
IDU Indoor heat
parameters exchanger's inlet
temp
Opening angle of
indoor EXV
Communication
data
——
——
GMV-H224WL/A-X
GMV-224WL/C-X
GMV-H280WL/A-X
GMV-280WL/C-X
GMV-H335WL/A-X
GMV-335WL/C-X
When ambient temperature is below 35℃, IPM
temperature is lower than 70℃. Maximum
℃
temperature is 80℃.
——
℃
●According to ambient temp, for a same IDU in
cool mode, the inlet temp will be 1℃~7℃ lower
℃
than the outlet temp, and 4~9℃ higher than the
low pressure value.
●For a same IDU in heat mode, the inlet temp will
℃
be 10℃~20℃ lower than the outlet temp.
●In cool mode, the opening angle of indoor EXV
varies within 40~480PLS.
PLS
●In heat mode, the opening angle of indoor EXV
varies within 70~480PLS.
Number of IDUs detected by software is the same
—
with the actual number. No communication error.
Indoor unit can drain water out completely and
smoothly. Condensate pipe has no backward
— slope of water; Water of outdoor unit can be
drained completely through drainage pipe. No
water drop from unit base.
Compressor and indoor/outdoor fan motor do not
—
have strange noise. Unit can operate normally.
29
When compressor works
normally, the current is no
more than 18.0A.
When compressor works
normally, the current is no
more than 23.0A.
When compressor works
normally, the current is no
more than 25.0A.