Baby Jogger CITY SELECT 2 Instrucciones Del Ensamblaje página 4

ASSEMBLY INSTRUCTIONS
EN
IMPORTANT - Read these instructions
carefully before use and keep them for
future reference. Your child' s safety may
be affected if you do not follow these
instructions.
1 Turn seat over and insert foot bar into
bracket.
2 Press gray button on foot bar and
slide the foot bar into the bracket until
it clicks into place.
ATTACHING BELLY BAR (on certain
models)
3 Attach belly bar mount over RIGHT
seat mount by pushing seat mount
button in and sliding belly bar mount
over seat mount.
4 Push belly bar mount toward seat
frame until it clicks into frame and
behind seat mount button.
5 Attach belly bar over LEFT seat
mount by pushing seat mount button
in and sliding belly bar over seat
mount until it secures to frame.
6 Push belly bar toward seat frame
until it clicks into frame and behind
seat mount button.
7 To secure, rotate belly bar down to
connect to belly bar mount.
8 To open belly bar, (a) slide button
release on top of belly bar end, then
(b) press the button on bottom
of belly bar and (c) rotate up from
mount.
ATTACHING SEAT TO STROLLER
9 Remove front mounting bracket plugs
on the stroller by firmly pressing the
black button located above the front
wheel and pulling up on the plug.
10 Insert right adapter bracket into the
right mounting bracket until it clicks
into place. Repeat on left side.
NOTE: The adapter brackets are
labeled with an L or R for your
convenience. Left and right
are determined by standing in front of
and facing the stroller
11 Align mounting brackets on the
second seat with the top of the
adapter brackets.
12 Insert seat onto adapter brackets
until it clicks into place.
NOTE: Your City Select® 2 Second
Seat Kit can also be used facing the
rear of the stroller.
To remove City Select® 2 Second Seat:
13 Remove child from seat. Press grey
buttons on seat mounting brackets
and pull up until the seat detaches.
14 Press button on right adapter bracket
and pull upwards. Repeat on left side.
NOTE: Replace mounting bracket
plugs on the stroller when second
seat is not in use.
DO NOT let the calf support rest on
the child tray.
When Rear Facing:
DO NOT use the lower seating
position with a second seat, infant
car seat, or pram without the upper
seating position also being occupied.
15 To adjust the footwell: Press both
buttons on the side of the footwell
and pull footwell upwards.
4