Cleaning; Storage; Troubleshooting; Replacement Filter - Bucket Head BH01000 Manual Del Usuario

Cleaning

To keep your Wet/Dry Vac looking its
best, clean the outside with a cloth
dampened with warm water and mild
soap.
Problem
Vac will not pick up dirt
Vac will not run
WARNING: If any of the power head assembly parts should become
!
detached or broken, exposing motor or any other electrical components,
operation should be discontinued immediately to avoid personal injury or
further damage to the vacuum. This vacuum has no user serviceable parts,
except the filter.
Replacement filters are available where
you purchased your vac. The stock
number is VF2000.
MAINTENANCE

TROUBLESHOOTING

Cause
1. Clogged filter
2. Clogged hose
3. Air leak
1. No electricity

REPLACEMENT FILTER

(continued)

Storage

Before storing your powerhead, the cord
should be wrapped around the unit to
keep it from getting damaged.
The supply cord cannot be replaced. If
the cord is damaged, the vac should be
destroyed and replaced.
1. Clean or replace filter
2. Remove hose and
3. Make sure power
1. Make sure electrical
8
Remedy
(follow instructions on
page 7)
clear debris.
head is securely
attached to bucket and
the bucket is one of the
designated types
outlet has voltage.
(A qualified electrician
may need to be
contacted).