Cleaning The Blade And Ring; Sharpening And Lubrication; Sharpening; Lubrication - Diamond FAP250 Manual Del Usuario

5.3. CLEANING THE BLADE AND RING

CLEANING THE BLADE AND RING IS A DANGEROUS OPERATION, HENCE, TAKE GREAT CARE
TO PREVENT ANY POSSIBILITY OF CUTTING.
FOR THEIR CLEANING NEVER USE A WATER JET, BUT USE A DAMP CLOTH AND DETERGENTS,
THEN RINSE AND DRY WITH A CLOTH.
FOR THE CLEANING, USE NON-TOXIC PRODUCTS WHICH GUARANTEE THE PERFECT HYGIENE.
CLEAN CAREFULLY THE BLADE EDGE AND THE INSIDE OF THE RING.
USE A DAMP CLOTH TO CLEAN THE OPENING BETWEEN THE BLADE AND RING.
ROTATE MANUALLY THE BLADE AND CLEAN USING THE DAMP CLOTH. Fig.7-8
5.4. REASSEMBLING THE MACHINE
FOR THE MACHINE REASSEMBLY, REVERSE ALL THE ABOVE MENTIONED OPERATIONS.

6) SHARPENING AND LUBRICATION

6.1. SHARPENING

THIS A VERY IMPORTANT OPERATION TO CARRY OUT EVERY TIME THE CUTTING IS NOT
CLEAN, OR WHEN THE BLADE DRAGS THE SLICE.
THE USE AND THE TYPE OF PRODUCTS THAT HAVE BEEN SLICED DETERMINE THE
PERIODICITY OF THIS OPERATION.
BEFORE SHARPENING THE BLADE, CLEAN THE MACHINE AND DEGREASE THE BLADE
ACCURATELY.
1. PLUG THE MACHINE
2. LIFT THE SHARPENER ON THE CARRIAGE.
3. OPEN WITH THE HANDLE THE MAXIMUN SLICE SIZE (16MM)
4. PUT THE SHARPENER TO TAKE THE BLADE BETWEEN THE TWO GRINDING WHEELS.
5. KEEP BUTTON "B" PRESSED FOR 5/10 SECONDS TO SHARPEN.
6. KEEP BUTTON "A" PRESSED FOR A FEW SECONDS TO DEBURR.
7. STOP THE MACHINE AND RETURN THE SHRPENER IN ITS INITIAL POSITION. Fig.9-10
WARNING:
USE BUTTON "B" TO SHARPEN, AND BUTTON "A" TO DEBURR THE CUTTING EDGE.
DURING THE SHARPENING PROCESS, KEEP TO THE ORIGINAL DRAWING OF THE BLADE
BEVEL. REPLACE THE BLADE WHEN THE CLEARANCE BETWEEN THE RING AND BLADE
EXCEEDS 6 MMS

6.2. LUBRICATION

PERIODICALLY LUBRICATE THE SLIDING ELEMENTS WITH WHITE VASELINE OIL.
FOR NOT DAMAGING THE SLICER, NEVER USE SEED OIL OR OLIVE-OIL. LUBRICATE ALL
ELEMENTS USING THE OILERS AS SHOWN IN FIGURE. Fig. 11-12

6.3. MACHINE IDLE FOR A LONG TIME

SHOULD THE MACHINE BE IDLE FOR A LONG TIME, DISCONNECT THE WALL MAIN SWITCH AND
CLEAN THE MACHINE AND ITS ACCESSORIES ACCURATELY.
USE WHITE VASELINE OIL (OR SIMILAR PRODUCTS) TO PROTECT ALL THE MACHINE
ELEMENTS. WE ADVISE COVERING THE MACHINE WITH A NYLON (OR SIMILAR) CLOTH.
11