ENGLISH
soap. Never allow liquid to penetrate inside the tool or
immerse any of the parts in a liquid.
ACCESSORIES
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
WARNING! The use of any accessory not recommended
for use with this tool could be hazardous.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste. Should
you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make
this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
TROUBLESHOOTING GUIDE
BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
PROBLEM
Unit will not start.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. For
more information about our authorized service centers and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location nearest you, or visit us at www.blackanddecker-la.com
22
Re-use of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials. Local
regulations may provide for separate collection of electrical
products from the household, at municipal waste sites or by
the retailer when you purchase a new product.
TECHNICAL DATA
SANDER
TYPE
Input
voltage
Frequency
Power
No-load
speed
Weight
(tool only)
POSSIBLE CAUSE
Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is tripped.
Cord or switch is damaged.
BEW220
AR
B2C
V
220
220
120
Hz
50
50
W
150
.../min
14000
(rpm)
lbs (kg)
2.8 (1.27)
POSSIBLE SOLUTION
Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly
causes the circuit fuse to blow, discontinue
use immediately and have it serviced at a
BLACK+DECKER service center or authorized
servicer.)
Reset circuit breaker. (If the product repeatedly
causes the circuit breaker to trip, discontinue
use immediately and have it serviced at a
BLACK+DECKER service center or authorized
servicer.)
Have cord or switch replaced at BLACK+DECKER
Service Center or Authorized Servicer.
B3
B2
BR
220
127
60
60
60