Unit Repair And Excluded Liability - Siemens SITRANS LPS200 Instrucciones De Operación

Alarm output - Fail-safe option (AC or DC version, SPDT)
No
Fault
Fault
LED 2 LED 2
off red
Maintenance
SITRANS LPS200 requires no maintenance or cleaning under normal operating
conditions. Under severe operating conditions, the measuring vane may require periodic
cleaning. Brush off any accumulated deposits, taking care not to bend the vane.

Unit Repair and Excluded Liability

All changes and repairs must be done by qualified personnel, and applicable safety
regulations must be followed. Please note the following:
• The user is responsible for all changes and repairs made to the device.
• All new components must be provided by Siemens Milltronics Process Instruments Inc.
• Restrict repair to faulty components only.
• Do not re-use faulty components.
Page EN-16 SITRANS LPS200 – OPERATING INSTRUCTIONS
Connection example
Full detector with fail-safe option.
Output signal signals a fault if level reaches
high level switching point, the main voltage
fails, there is a faulty connection, or if the
unit is faulty.
signal
output
A5E34210883