Select Logo; Wi-Fi (In.tOuch Only) - Gecko in.k1000+ Manual De Usuario

+
1
Keypad functions

Select logo

After confirmation, the keypad will reset to reconfigure the
system� You will be asked to select the custom icons used
in the sleep mode�

Wi-Fi (in.touch only)

This page allows you to connect your in�touch module to a
Wi-Fi network or to change its network�
For more details about other in�touch connection
methods, please see the in�touch techbook�
After a few seconds the available networks will appear on
the screen, as well as their signal strength�
Swipe Up or Down the list to select your network�
If the Wi-Fi network is password protected, enter it when
prompted�
If no password is required, the in�touch will connect
automatically�
Once the in�touch module is connected to a
Wi-Fi network, a green check mark will appear in
the Wi-Fi menu and the network name will appear
in the Settings menu�
24