Taurus EXEO 2500 Manual De Instrucciones página 11

professional or industrial use.
- This appliance should be stored out of reach
of children and/or those with reduced physical,
sensorial or mental abilities or who are unfamiliar
with its use.
- Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
- Use the appliance, its accessories and tools in
accordance with these instructions. Take working
conditions and job to be carried out into consi-
deration. Using the appliance for anything other
than its intended use can create hazards.
- Do not operate on areas which contain metal
objects such as nails and/or screws.
- Never vacuum hot or sharp objects (cigarette
butts, ash, nails, etc.).
Service:
- Any misuse or failure to follow the instructions
for use may be dangerous, rendering the guaran-
tee and the manufacturer's liability null and void.
Instructions for use
Before use:
- Make sure that all the product's packaging has
been removed.
Vacuuming function:
- Fit the hose unit to the vacuum cleaner's air
intake. (Fig. 1).
- To take off the vacuum hose, turn the hose to
the left and pull outwards. (Fig. 2).
Insertion of accessories into the appliance's
grip:
- The appliance's grip is designed in such a way
that it allows the insertion of the following acces-
sories: (use the combination that best meets your
requirements).
- Extendable extension tube: Designed to provide
access to surfaces which are out of reach and
make floor cleaning comfortable, its length can be
adjusted by using the adjustment control.
- Vacuum cleaner base: Specially designed for
cleaning floors (both rugs, carpets and hard
floors), its base has a retractable brush that can
be adjusted to two heights for greater efficiency
on these floors. It is advisable to have the brush
out for hard floors and the brush in for rugs and
carpets.
- Crevice nozzle: Specially designed for getting
into cracks and difficult corners.
- Upholstery brush: Especially suitable for clea-
ning textile surfaces.
Use:
- Take the length of cable required out of the
housing.. (M)
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off switch
(G)
Electronic power control:
-The power of the appliance can be regulated by
using the power regulator control.(S) This function
is very useful, as it makes it possible to adapt the
power of the appliance to the type of work that
needs to be done.
Once you have finished using the appliance:
- Turn the appliance off, using the on/off switch.
(G)
- Unplug the appliance to the mains.
- The cable housing allows the cable to be stored
as well as extract the length of cable necessary
to operate the device, avoiding risk of accident
situations.
- Retract the cable by pressing the roller cable
button and guide the cable into the appliance. (F)
- Clean the appliance.
Carry handle/s:
- The device has a handle on the upper part so it
can be transported easily and comfortably.(H)
Parking position:
- This appliance has one parking position for
comfortable and straightforward storage.
- To use the horizontal parking position, fix the
break pad hook to the hook situated on the rear
side of the appliance (Fig. 3).
Cleaning
- Disconnect the appliance from the mains and let
it cool before undertaking any cleaning task.
- Clean the appliance using a damp cloth with a
few drops of detergent and then dry it.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
Emptying the dust box:
- Empty the vacuum deposit when dust is visible
though the transparent walls, when it is full, or
when the vacuum cleaner does not work to its
full potential. Disconnect the dust box from the
appliance. (Fig. 4)