Sennheiser ew 300 Serie Instrucciones Para El Uso página 60

TUNE
tune
60
Configuring a channel preset
Transmitters and receivers of the Sennheiser evolution wireless series ew 300
have 8 switchable frequencies (channel presets) respectively to store up to
8 transmission/receiving frequencies. With the EM 300 receiver, you can
additionally assign a name.
You can directly switch between the channel presets (
frequency, channel number").
Setting the transmission/receiving frequency
Transmission and receiving frequencies are tunable in 25-kHz steps within a
switching bandwidth of 32 MHz max.
Special notes on multi-channel operation:
Several devices of the Sennheiser evolution wireless series ew 300 can be used
simultaneously on different frequencies. The factory-preset frequencies are
intermodulation-free. Before you program new frequency combinations, please
refer to the information on the correct frequency choice given in the planning
brochure "Practical Applications in RF Technology" which your local
Sennheiser agent has in stock or will be pleased to order for you from
Sennheiser.
Select the channel preset for which you wish to set a frequency.
Select the "TUNE" menu by pressing the
appears on the display; after a short pause the currently set frequency
is displayed.
With the buttons you can now select a different frequency. The
/
frequencies are tunable in 25-kHz steps. The new frequency starts
flashing on the display and becomes effective immediately.
Press the SET button to return to the top menu level. The display
then switches back to the standard display.
"Selecting the
SET button until "TUNE"