Work C-72 Instrucciones De Usuario página 8

13. - 1-24 CHANNEL OUTPUT CONNECTOR
From this 25 pins "D" connector" we can control the
signal output for channel 1 to 24
14. - 25-48 CHANNEL OUTPUT CONNECTOR
From this 25 pins "D" connector" we can control the
signal output for channel 25 to 48
15. - 49-72 CHANNEL OUTPUT CONNECTOR
From this 25 pins "D" connector" we can control the
signal output for channel 49 to 72
16. - OUTPUT LEVEL
OUTPUT LEVEL
Analog output level selector between 10V, 12 V and 15V
DIP SWITCH
OUTPUT
1 2 3 4
10 V ON OFF OFF ON
12 V ON OFF ON OFF
1 2 3 4
15 V ON ON OFF OFF
17. - ANALOGUE OUTPUT POLARITY
ANALOG OUPUT
POLARITY
Analog output polarity selector
START
STEP 1 : With the power turned off, connect a DMX or MIDI
controller.
STEP 2 : Connect the outputs to the "D" connectors (13, 14 &
15) in the rear panel. The 13th connector controls the outputs 1 to
24, the 14th controls the outputs 25 to 48 and the 15th controls the
49 to 72 outputs.
STEP 3 : Use the C 72 DMX to convert the output connectors in
DIN plugs.
STEP 4 : After finish all the connections, turn on the equipment
and follow the instructions of this manual.