Taking Measurements - Fora D30 Manual Del Usuario

Taking Measurement
► Taking a single measurement
Always apply the pressure cuff before turning on the monitor.
Step 1
Press . All the LCD symbols will appear. Press
to select user "
whose test reading will be stored in its memory.
Then the cuff will begin to inflate automatically.
Step 2
The heart symbol "
pulse is detected during the inflation.
Step 3
After the measurement, the monitor
displays the systolic pressure, diastolic
pressure and pulse rate.
Step 4
Press to switch off. If left idle for 3 min-
utes, it will switch off automatically.
• If you press
• If the pulse rate symbol is shown as "
indicates that the monitor has detected an irregular heart beat.
" (numbers from1 to 4)
" will flash when a
during measurement, the monitor will be turned off.
NOTE
" instead of " " , this
41