Piaget 800P Manual De Instrucciones página 7

800P
Adjusting the functions
Winding the movement
Self-winding watches are wound by the movement of the wrist when the watch is worn. If the watch has
not been worn for around 85 hours, wind it by hand with the crown in position 0*, that is turn the crown in
the forward direction (around 10 turns of the crown are sufficient to restart the mechanism).
Setting the time
Pull the crown out to position 2* then turn it forward or backward to position the hands. The mechanism
is equipped with a balance-stopping device. Pulling the crown to position 2 will stop the movement.
Push the crown back to position 0 after the adjustment.
Setting the date
Pull the crown out to position 1* then turn it forward to select the desired date. Since the date change
occurs at midnight, make sure you distinguish midnight from noon when proceeding to the adjustment.
In order to avoid damaging the mechanism, we advise you not to adjust the date between 9 p.m
and 3 a.m. Push the crown back to position 0 after the adjustment.
10
All manuals and user guides at all-guides.com
800P
Self-winding mechanical movement, date, seconds
Central
seconds
Date
*
Piaget Polo Forty Five models are equipped with a screw-in crown that provides water resistance up to 100m. Unscrew
the crown before winding the movement or pulling it out to the desired position. Screw it back in after winding the
movement or any other adjustment.
FORWARD
*
0 - 1 - 2
BACKWARD
11