9. Adjusting the door Opening Angle
By factory default, the door opens by 115 degrees. You can use the limiter pin to adjust
the opening angle down to 90 degrees, depending on the installation conditions.
• Open the door to less than 90 degrees, and then completely insert the limiter pin
through the top and bottom holes of the top hinge as shown in illustrations (1) and (2).
• Close the door and make sure the limiter pin does not interfere with the hinge cover.
CAUTION
• Insert the limiter pin before putting the refrigerator into the cabinet.
• If the limiter pin is not inserted completely, the hinge and the hinge cover may get
damaged.
115°
Factory default 115°
Dacor_BRW9000R_IM_DA68-03621J-02_EN.indd 39
Limiter pin
With limiter pin 90°
Insert
Completely
2/32"
(2 mm)
90°
English 39
2020-10-19
10:53:08