ASSEMBLY INSTRUCTIONS
10
E
C
Attach nozzle (E) and Rotary nozzle (C) into end of
lance (I) by pressing selected nozzle into place. It will
make a "click" sound when firmly in place.
Note: Always push safety lock button to lock trigger
when changing lances and nozzles to ensure that they
do not accidentally eject with force during removal.
12
O
Foam Cannon Installation
The foam cannon (O) comes with a straw which is fitted
into high pressure top. If you do not see the straw,
look inside the foam cannon and attach it to the high
pressure top. When using foam cannon, fill it with a
properly formulated detergent or cleaner with a water
ratio according to instructions on the container.
DO NOT use thick or gel-like detergents as they will clog
the foam cannon and can cause damage.
10
I
750ml
600ml
450ml
300ml
150ml
11
2
E
C
To remove nozzle (E) and Rotary nozzle (C), pull back on
collar of lance (I) and pull out nozzle.
13
Attach Foam Cannon (O) into end of lance by
pressing cannon into place. It will make a "click"
sound when firmly in place.
Note: Always lock spray gun when changing the foam
cannon to ensure it does not eject with force.
When using the foam cannon, fill it with a properly
formulated detergent or cleaner with water ratio
according to instructions on the container.
I
1
I