P002-P091̲EW1012(欧州) 05.06.21 16:32 ページ 28
TIPS ON USE
Float Brush
Brush carefully between teeth or around
teeth that are not straight.
Place the bristles of the toothbrush gently
against your teeth.
Move the brush slowly as if you are
drawing small circles.
45°
Front teeth, and between teeth and gums:
• Place the bristles at 45°.
Brush the back of teeth or where teeth are not
straight:
• Brush vertically.
• Move the toothbrush to match the angle of the
teeth.
Brush the chewing surface of teeth:
• Brush at a 90° angle.
Far end of back teeth (molars)
• Use the tips of the brush.
CAUTION:
• Do not press the brush hard where the teeth meet the gums. Do not keep
the brush in one spot for a long time. Doing so may damage the teeth or
gums. People with severe tooth or gum diseases should consult their
dentist before using this product.
• Allow only the bristles, not the plastic head, to touch your teeth. Failure to
observe this precaution may damage the teeth or gums.
28
TIPS ON USE
3-Angle Brush
First place the brush on the front teeth and then move towards the back
teeth.
1. Place the brush onto the front teeth.
• Be sure to place the brush firmly so that
the tips of the bristles cover the area
between your teeth and gums.
• If you place the brush on the back teeth
first, you will not be able to cover the
teeth correctly with the brush.
2. Move the brush parallel to the teeth and
brush the teeth toward the molars (back
teeth).
• Move the brush slowly and repeat 2-3
times.
3. Brush all teeth, repeating steps 1 and 2
above.
Covering the teeth with the brush
Both sides of the brush should cover the area
between the teeth and gums.
If you feel that the brush does not fit your teeth
properly
Angle the brush slightly until you feel the brush
touching your teeth securely. (This is effective for
the front teeth.)
29