P002-P091̲EW1012(欧州) 05.06.21 16:32 ページ 30
AFTER USE
Toothbrush
1. Wash the toothbrush with water and shake well to remove the water.
2. Return the brush to the brush storage case.
3. Use a cloth to wipe off the main unit. Wash hard-to-remove stains with
water.
• Do not submerge the main unit in water
for a long time.
• After washing with water, wipe dry
with a cloth.
• Do not scratch or damage the water-
proof rubber seal. Doing so may allow
water to seep inside and damage the
main unit.
4. Place the main unit on the charger.
If the identification ring comes off, put it back on as shown.
• Do not forcibly pull the identification ring since it can break easily.
• Using the toothbrush without the
identification ring has no effect on
performance; the ring is simply for user
identification purposes.
30
Waterproof
rubber seal
MAINTENANCE
Brush storage case
CAUTION:
Be sure to remove the power plug from the electrical outlet before cleaning
the product. Failure to do so may result in electrical shock or other injury.
1. Remove the separator.
2. Wash with water.
4. Place the hook of the sepa-
rator onto the back of the lid.
If the lid comes off, clip q one
of the hooks from the outside
first, then w clip the other hook
from the back of the separator
as shown.
Charger
Use a cloth to wipe off the charger.
• If cleaning requires a detergent, use a mild, neutral cleanser.
• Do not use harsh chemicals such as thinner, benzene or alcohol as these
will discolour the surface.
About once every six months wipe the prongs of the power plug with a dry
cloth.
CAUTION:
• Do not wash or submerge the charger in water.
• Clean the power plug periodically. Dirt and dust buildup may cause
electrical shock or reduce the effectiveness of the insulation, thus resulting
in overheating and a fire.
3. Wipe with a dry cloth.
q
w
31