Important Warning - Robot Coupe CMP 250 V.V Manual Del Usuario

In order to prevent accidents such as electrical shock, personal injury, fire, and in order to limit property/product damage when
using your power mixer, follow the instructions hereafter very carefully and strictly adhere to them. This manual should be kept
nearby for reference and should be read by all first time users of the power mixer.
UNPACKING
• Carefully remove the equipment from the
packaging and take out all the boxes or pac-
kets containing attachments or specific items.
• Warning- Some parts are very sharp e.g.
blade.
Wear cutting gloves when handling the
blade.
STORAGE
• You are advised to install the wall support
provided with the machine and to store your
power mixer on it.
POWER SUPPLY
• Always check that your power supply cor-
responds to that indicated on the rating plate
on the motor unit and that it can take the am-
perage.
SPECIFICATIONS
• The standard machine is operated on a
standard 120 Volt, 60 Hz, 15 Amp outlet.

IMPORTANT WARNING

DIMENSIONS (in inches)
CMP 250 COMBI
A = 3
B = 25
C = 3
A
D = 11
E = 15
B
F = 4
D
CMP 250 V.V.
E
A = 3 3 /
4
B = 24
C = 3 9 /
1 6
D = 8 7 /
8
C F
Blade Attachment Capacities
• Thanks to a very powerful motor, the CMP 250 can process up to
16 quarts, CMP 300 can process up to 32 quarts and the CMP
350 up to 50 quarts. The quality of the finished product is outstan-
ding.
Whisk Attachment Capacities
• Using the whisk attachment all three models process from 2 to
30 egg whites and puree 2 to 70 pounds.
• Each power mixer is supplied with a wall support for easy
storage.
CMP 300 COMBI
3 / A = 3 3 /
4 4
5 / B = 27 9 /
8 1 6
9 / C = 3 9 /
1 6 1 6
/ D = 13 /
3 11
4 1 6
3 / E = 15 3 /
8 8
3 / F = 4 3 /
4 4
CMP 300 V.V. CMP 350 V.V.
A = 3 3 / A = 3 3 /
4 4
B = 26 B = 28 /
1
4
C = 3 9 / C = 3 9 /
1 6 1 6
D = 12 D = 14 5 /
1 6
W A R N I N G
KEEP THESE INSTRUCTIONS
IN A SAFE PLACE
SAFETY FEATURES
• Safety on Control Switches
This safety mechanism prevents any uninten-
tional starting of the power mixer. Two buttons
must be pressed to start the power mixer. See
section on operating the power mixer.
• Safeties on motor : Thermal and overload pro-
tection.
If there is an obstruction in the container (a spoon
or ustensil) or the machine is overused and be-
comes hot the power mixer will stop. If the power
mixer stops because of a thermal overload (po-
wer mixer is too hot), wait for a period of up to
30 minutes for the power mixer to cool down be-
fore restarting.
• No volt release safety (Supply failure).
If there is a power failure or the machine is un-
plugged, the power mixer will not restart by it-
self. See section on operating the power mixer.
• Be careful when handling the blades. They
are very sharp! Wear cutting gloves when
handling the blades.
WARNING