Setting The Time And Adjusting The Stopwatch Hand Position - Timberland 13673 Manual De Instrucciones

All manuals and user guides at all-guides.com
Size: 170 x 55mm
Color: Blk
1. MAIN TIME SETTING
Minute hand
Hour hand
Turn to set the hour and minute hands.
CROWN:
SETTING THE TIME AND ADJUSTING THE STOPWATCH
HAND POSITION
• This watch is so designed that the following are all made with the crown at the second
click position
1) main time setting
2) stopwatch hand position adjustment
Once the crown is pulled out to the second click, be sure to check and adjust 1) and 2) at the
same time.
: Pull out to second click when the second hand is at the 12 o'clock position.
CROWN
Size: 85 x 55mm
Color: Blk
Small second hand
STOPWATCH 1/5-second hand
Hour hand
Minute hand
(Light) D
(Set) C
(Mode) E
• Display: Hour, minute,
STOPWATCH minute hand
second, day, date, month.
• Alarm, hourly chime
• TIME / CALENDAR
• 12/24 hours selection,
automatic calendar
• STOPWATCH
• 1/100 second stopwatch
Measures up to 60 minutes in 1/5 second increments.
• second time zone
Split time measurement is possible.
• EL illumination
1. When the stopwatch is or has been measuring or is stopped, if the crown is pulled out to the second
click, it will automatically reset the STOPWATCH hands to "0".
2. It is recommended that the hands be set to the time a few minutes ahead of the current time, taking
into consideration the time required to adjust the STOPWATCH hand position if necessary.
3. When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is so designed
that the date changes once in 24 hours.
4. when setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn
it back to the exact minute.
24-HOUR SUB-DIAL SETTING:
The 24-hour hand moves correspondingly with the hour
and minute hands. When setting the time be sure to
check that the 24-hour hand is set properly.
2. STOPWATCH HAND POSITION ADJUSTMENT
v If the STOPWATCH hands are not in the
"0" position, follow the procedure below to
set them to the "0" position.
a: Normal position
b: First click
c: Second click
24 hour hand
Date